Should you drive on a flat tire?

If you’re in a pinch on the side of the roadside in Nashville with a flat tire, it may be tempting to hit the gas and push through. But don’t do it! Driving on your flat tire is not only inconvenient – but dangerous too! Not to mention that running on a flat tire can easily cause permanent damage to your flat tire and make a tire repair impossible. If you have Run-Flat tires however, you can drive cautiously for up 50 miles at 50mph before replacing them as soon as possible.



Are you unsure of what to do if your car has a flat tire? Don’t worry, we’ve got the answers! First thing’s first: make sure you get off the road and out of harm’s way. Once pulled over in a safe place, chances are one or more options will be available for how best to solve this issue. Driving on a flat tire is not only dangerous; it can also cause costly damage beyond just the replacement cost of your wheel – from brakes alignment issues to suspension problems down the line! Avoid unnecessary repairs and keep yourself (and others) safe by addressing that pesky puncture promptly. Our tire repair techs service Nashville and are willing to get you back on the road in no time!



If you have a flat tire on the side of the road in Nashville, there are several options available. If you happen to have a spare tire with you, that’s an easy solution; if not, emergency sealants may help fill punctures no bigger than ¼ inch in diameter. However – shredded tires or those with large punctures should be inspected by professionals at Nashville Tire Repair and Roadside Assistance who can assist and provide experienced advice and/or tire repair. 



Keeping tires in good condition is essential for a safe driving experience. To avoid the hassle of dealing with a flat tire, make sure to include checking your tire pressure on your monthly maintenance list. The National Highway Traffic Safety Administration recommends that all tires – including spares – get checked after at least three hours since they were last driven; this helps ensure an accurate reading and can help you stay ahead of potentially dangerous issues like low fuel efficiency and punctures due to underinflation.



Keeping your tires inflated to the manufacturer-recommended pressure is key for car safety and performance, but visual inspection won’t always be enough. Your Tire Pressure Monitoring System (TPMS) can help by warning you when a tire loses air or all of them are equally low – however waiting until then puts you at risk! Utilize a tire gauge regularly so that readings stay on point – information about correct pressures can be found in your owner’s manual or driver’s side door jamb.



Staying ahead of tire wear is essential for safe and efficient driving. Make sure to check your tire pressure monthly, rotate them every 5-10 thousand miles (typically at oil change intervals), and visually inspect them regularly for signs of damage or excessive tread depth. For a minimum standard, you should ensure that tires have 3/32 inches in tread depth before hitting the road – some states may require additional safety standards depending on where you are located!



For every ride you take, make sure to double check your vehicle’s tire pressure and load rating. Even the slightest overload can lead to an undesired scenario – like a tire blowout! So be aware of how much luggage or gear is on board before hitting the road. Plus don’t forget that increasing your tires’ air pressure could help them bear more weight if needed in these situations but never go above their maximum limit for safety reasons!



Driving in nashville can be hazardous – literally. Large pieces of debris like nails and glass pose a significant risk to your tires, while potholes may not cause an immediate puncture but nonetheless lead to damage in the form of cuts or bulges that result in flat tires later on. When possible, take alternate routes around areas with potentially dangerous road conditions; if frequent flats persist despite avoiding known hazards however, it might be time for new rubber!